JTY-GD-S832 Container Smoke Sensor / Battery Swap Station Smoke Detector / CCCF Smoke Detector
Contact Info
- No.47, Xikeng Road, Fucheng Subdistrict, Longhua District, Shenzhen City, 518000
- 陈诚
- 0158-89370119
- 2315426052@qq.com
JTY-GD-S832Container Smoke Sensor / Charging and Swapping Station Smoke Detector / CCCF Smoke Detector
I. Overview:
The JTY-GD-S832 type point-type photoelectric smoke fire detector (hereinafter referred to as the detector) adopts a non-polarity power input, which can detect the smoke generated during a fire and send an alarm signal in time. The detector is controlled by a CPU and can intelligently judge the smoke concentration generated during a fire. When the detector is in the monitoring state, the red indicator light flashes and the working current is small; when the on-site smoke concentration exceeds the set alarm threshold, the detector enters the alarm state, the red indicator light stays on, and the relay operates at the same time. The detector is equipped with a relay dry contact output, and the alarm signal is given in the form of changes in the relay contact action, and it has an alarm locking function. The alarm can only be reset by a short power outage. The detector has an automatic dust accumulation compensation function, which can reduce the impact of dust on the sensitivity of the detector. The detector is suitable for places where a large amount of smoke is generated during a fire but no smoke is generated under normal circumstances, such as: communication stations, substations, oil production platforms, private generator rooms, stations along railways, computer network centers, high and low voltage switchgears, box-type substations, cable tunnels (interlayers, shafts), large equipment power cabinets, wind turbine cabins and power cabinets, cargo holds for flammable materials, electronic data libraries and other relatively enclosed and narrow spaces; it is not suitable for places where steam and oil mist may be generated; it is not suitable for places where smoke remains under normal circumstances.
II. Features and Technical Indicators:
1. Execution Standard: GB4715-2005
2. Working Voltage: DC12V/24V (Allowable Range: 9V~30V)
3. Working Current: Monitoring State ＜1mA@DC12V ＜5mA @DC24V; Fire Alarm ＜30mA@DC12V ＜35mA @DC24V
4. Relay Output: Normally Open (Closed after fire alarm), Contact Capacity: 1 A 30VDC
5. Operation Indication: Monitoring State: Red indicator light flashes about once every 6 seconds; Alarm State: Red indicator light stays on; Fault State: Red indicator light flashes twice continuously about every 6 seconds
6. Operating Environment: Temperature: -10℃～+65℃, Relative Humidity: ≤95% (40℃±2℃, no condensation)
7. External Dimensions: 75mm×51.8mm×38.5mm (with base)
8. Weight: Approx. 80g
9. Standard Packaging Quantity: 100 pieces/box
10. Installation Height: ≤12m
11. Protection Area: Refer to GB50116-98 "Code for Design of Automatic Fire Alarm Systems"
All products have complete fire protection certifications, welcome to call for consultation. www.szhsj119.com
Shenzhen Hongsheng High-Tech Electronics Co., Ltd.
Contact Person: Mr. Chen Cheng
Phone: [15889370119] (WeChat same number)
| Electronic Components & Supplies/Sensors/Displacement Sensors | |
